# My journey with "Pause at Height", learned a lot

**URL:** <https://3dprintingspace.com/t/my-journey-with-pause-at-height-learned-a-lot/5588>\
**Category:** General Discussion\
**Created:** [April 24, 2023, 12:22pm UTC](https://3dprintingspace.com/t/my-journey-with-pause-at-height-learned-a-lot/5588 "2023-04-24T12:22:52Z")\
**Posts on this page:** 1\
**Showing post:** 20

<div class="post-metadata">

**Author:** ![SOLESHOE](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/s/e8c25b/32.png) [@SOLESHOE](https://3dprintingspace.com/u/SOLESHOE)\
**Post date:** [April 8, 2024, 11:18am UTC](https://3dprintingspace.com/t/my-journey-with-pause-at-height-learned-a-lot/5588/20 "2024-04-08T11:18:15Z")

</div>

Hi,

The printer did pause at requested layer height but nozzle didn’t raise. then i got a bunch of errors in the console (Unknown command:“PAUSE\_RESUME]”, Unknown command:“M300” and Unknown command:“M226”). Then the head moved to requested park position, and after changing filament, when i hit the resume button, i had another error (“Printer not homed”) preventing printing to resume. Any idea ?

---

_[View the full topic](https://3dprintingspace.com/t/my-journey-with-pause-at-height-learned-a-lot/5588)._