# PETg in other finishes?

**URL:** <https://3dprintingspace.com/t/petg-in-other-finishes/1794>\
**Category:** 3D Printing Materials\
**Created:** [February 23, 2021, 1:11am UTC](https://3dprintingspace.com/t/petg-in-other-finishes/1794 "2021-02-23T01:11:48Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\
**Post date:** [February 23, 2021, 1:11am UTC](https://3dprintingspace.com/t/petg-in-other-finishes/1794/1 "2021-02-23T01:11:48Z")

</div>

So I only have a roll of Sakata PETg and the parts are coming out nicely but they are shiny. is there a similar filament in PETg that’s more of a matte finish?

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [February 23, 2021, 4:53am UTC](https://3dprintingspace.com/t/petg-in-other-finishes/1794/2 "2021-02-23T04:53:51Z")

</div>

Hi Glen, Try to drop the temp 5 deg, I find with Sakata finish is dependent on the printed temp.

---

<div class="post-metadata">

**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\
**Post date:** [February 23, 2021, 9:36am UTC](https://3dprintingspace.com/t/petg-in-other-finishes/1794/3 "2021-02-23T09:36:11Z")

</div>

heh the parts are coming out so nice I’m afraid to mess with it but I did do a temperature tower. I’ll have a look at that

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [February 23, 2021, 5:06pm UTC](https://3dprintingspace.com/t/petg-in-other-finishes/1794/4 "2021-02-23T17:06:18Z")

</div>

LOL, I hear ya, If it ain’t broke don’t fix it.
