# Printing Letter Issues **URL:** \ **Category:** Creality Ender 3 S1 / S1 Pro\ **Created:** [July 6, 2023, 8:21pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788 "2023-07-06T20:21:38Z")\ **Posts on this page:** 18\ **Page:** 1
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 6, 2023, 8:21pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/1 "2023-07-06T20:21:38Z")
Hi everyone, and thank you in advance for your help! I hope that I started this topic in the correct area, if not please let me know! As you can see in the below photo, the printer (Ender 3) works more or less correctly, but I’m facing with an issue every time I print and I try to add letters. It always leaves some space without cover of the PLA filament. What I tried: Changing temperature of the PLA / PLA material / Changing wall configuration / Slicer, etc ![Letter_Issues](https://storage.3dprintingspace.com/original/2X/f/fd11c7b7571422d36f256a9af12a61f0c4f91afa.jpeg) Can someone help me? ---
**Author:** ![HobbyMaker3D](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/h/bb73d2/32.png) [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\ **Post date:** [July 6, 2023, 11:32pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/2 "2023-07-06T23:32:45Z")
Maybe try this setting, I usually do not have the problems with gaps in letters. ![image](https://storage.3dprintingspace.com/original/2X/0/0a45ee203199201ed3cf48d2ac11427b8c727335.png) ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 7, 2023, 6:32am UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/3 "2023-07-07T06:32:43Z")
Hello HobbyMaker3D, First of all thanks for your reply. I’ll try your suggestion during this weekend. I have not seen that option before, so thanks a lot. Once I do a print I’ll by able to tell you if your suggestion worked! Thanks again! ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 7, 2023, 7:21pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/4 "2023-07-07T19:21:20Z")
Hello, I manage to do a print today and the issue is still there. It seems that is going better, but you can clearly see it. I attach here another picture ![IMG_20230707_211738011](https://storage.3dprintingspace.com/original/2X/b/b80b7fe1bbe2726a6f6dad2c3ba19bade45b5b58.jpeg) Do you have any other suggestions? Thanks I’m advance! ---
**Author:** ![HobbyMaker3D](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/h/bb73d2/32.png) [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\ **Post date:** [July 7, 2023, 7:35pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/5 "2023-07-07T19:35:23Z")
There are two others setting I always use. These may help closing the gaps. ![image](https://storage.3dprintingspace.com/original/2X/2/26b4dad849a1c0d0d79e13b99479cbf77c25794e.png) ---
**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\ **Post date:** [July 7, 2023, 8:17pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/6 "2023-07-07T20:17:45Z")
Yes I second this, give it a try and see if that helps! Matthew ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 8, 2023, 7:50am UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/7 "2023-07-08T07:50:18Z")
Hello to both! I’ll try this on Monday, as I’m out of home during the weekend, but thanks in advance for your quick help! I’ll update you on Monday! ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 10, 2023, 9:23pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/8 "2023-07-10T21:23:16Z")
Hello, I did the suggested changes, but as you can see in the picture, still having the same issue… Do you think if there is any other possible options / issues? ![IMG_20230710_231422541](https://storage.3dprintingspace.com/original/2X/4/43b585f023638e9b01f4bd4a1739c1134582496d.jpeg) Thanks again in advance! ---
**Author:** ![mykepredko](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mykepredko/32/4027_2.png) [@mykepredko](https://3dprintingspace.com/u/mykepredko)\ **Post date:** [July 10, 2023, 11:52pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/9 "2023-07-10T23:52:10Z")
Can you share your .stl? ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 11, 2023, 9:00pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/10 "2023-07-11T21:00:10Z")
Hello, Yes sure, but the problem is not only with this file, but in general. [Here I added the STL and the gcode](https://drive.google.com/drive/u/1/folders/1XWlIMo6WHHMKI0Y3IOilsGvXmHMqWJQo) that I used. Thanks in advance for your help! Regards, ---
**Author:** ![HobbyMaker3D](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/h/bb73d2/32.png) [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\ **Post date:** [July 11, 2023, 11:12pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/11 "2023-07-11T23:12:43Z")
I ran you .stl file through Cura and found this. The settings of line width of 0.4 show small lines in middle of the letters. When I changed it to 0.5 the lessened. Sometimes the font you use can cause problems. I have found hat Arial Narrow works well with 3D printing. Give it a shot. See attatched. ![R1_original](https://storage.3dprintingspace.com/original/2X/6/696e1b34a5e8161d3bf19628b6979ac453e7a5da.jpeg) ![R1_0.5LineWidth](https://storage.3dprintingspace.com/original/2X/b/ba76354ac70f1cfe85b14a45b9bfef1cd12e3dfa.jpeg) ---
**Author:** ![mykepredko](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mykepredko/32/4027_2.png) [@mykepredko](https://3dprintingspace.com/u/mykepredko)\ **Post date:** [July 12, 2023, 6:07am UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/12 "2023-07-12T06:07:48Z")
Hey, I just tried your .stl in ABS with my standard setting(s) and here are the results I got: ![image](https://storage.3dprintingspace.com/original/2X/3/30896b864215ea0eb96a3d85380ade73a4245436.jpeg) The percentages is the extrusion factor as I’ve found it to cause blobbing in the past, but not for this model. Temperature is 230C, Bed is 80C, speed is 50mm/s, retraction 0.5mm and pressure advance 0.1325. You might want to look at changing your retraction value as there may be a problem here. You can also vary your extrusion factor to see if that helps any. ---
**Author:** ![mykepredko](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mykepredko/32/4027_2.png) [@mykepredko](https://3dprintingspace.com/u/mykepredko)\ **Post date:** [July 12, 2023, 3:49pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/13 "2023-07-12T15:49:12Z")
One more data point - I printed the tag again in PLA: ![image](https://storage.3dprintingspace.com/original/2X/3/3e4d73a372fe1e0e7b78e2b13283ecf26635a14b.jpeg) Temperature 225C, Bed 60C, Micro Swiss NG extruder, 50mm/s speed, 0.2mm retraction with the extrusion factor written on the pieces. I used a custom designed direct drive toolhead on the previous ABS prints (sorry, I should have noted that). I don’t know what else to say other than look at your retraction settings - maybe experiment with them a bit. ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 12, 2023, 9:50pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/14 "2023-07-12T21:50:01Z")
Hi all, Thanks for your message and for the test prints that you did! I really appreciate it! I’ll do some test in these days with your suggestions and I let you know if I managed to resolve the issue! Thanks again, I truly appreciate this! ---
**Author:** ![chrisclw](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/c/c0e974/32.png) [@chrisclw](https://3dprintingspace.com/u/chrisclw)\ **Post date:** [July 14, 2023, 5:51pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/15 "2023-07-14T17:51:10Z")
If you are using Cura, I would suggest to try the “ironing” option for the top most layer. If you printer setting is dial-in correctly, this would help to close any gap at the top. ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 15, 2023, 7:17pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/16 "2023-07-15T19:17:53Z")
Hello, Thanks!! I did some tests and improved a little bit the print I’ll try your suggestion on Monday, as I’m out for the weekend! Regards ---
**Author:** ![juansa](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/8e8cbc/32.png) [@juansa](https://3dprintingspace.com/u/juansa)\ **Post date:** [July 21, 2023, 5:10pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/17 "2023-07-21T17:10:05Z")
Hi All, Thanks for the great help! Sorry for the long time without writing, but I was very busy and I didn’t managed to had the time to experiment. Now, had the time to test it and I think with the Ironing part it solved the main problem! The only thing is that now the lines seems to be very visible and other minor issues, but this was a great advance! ![FInal](https://storage.3dprintingspace.com/original/2X/2/21abdff6d76ccd22ca85124fe4fd27c04c214cc3.jpeg) Thanks again for all the help! ---
**Author:** ![3D\_nerd](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/3/41988e/32.png) [@3D\_nerd](https://3dprintingspace.com/u/3D_nerd)\ **Post date:** [September 22, 2026, 3:44pm UTC](https://3dprintingspace.com/t/printing-letter-issues/6788/18 "2026-09-22T15:44:30Z")
I’ve had similar issues with letters and small details on my Ender 3, and it usually comes down to how the slicer handles thin features. Since you’ve already tried different wall configurations, I’d suggest checking your “minimum wall thickness” or “thin wall behavior” settings in your slicer. Sometimes the gaps appear because the slicer thinks the letter walls are too thin to print properly and just skips those sections entirely. Another thing worth checking is your extrusion multiplier or flow rate. Even if it looks fine on larger prints, letters and fine details can really expose slight under-extrusion. You might want to print a calibration cube or flow test specifically to dial this in. Also, slowing down your print speed for small details can help the printer lay down more consistent layers in those tight areas. What font and letter height are you working with? Sometimes really small or intricate fonts just don’t translate well to FDM printing, and switching to a simpler, blockier font can make a huge difference in printability.