# Replace hot end

**URL:** <https://3dprintingspace.com/t/replace-hot-end/9193>\
**Category:** Creality Ender 7\
**Created:** [August 23, 2024, 12:45am UTC](https://3dprintingspace.com/t/replace-hot-end/9193 "2024-08-23T00:45:43Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![JanPV2](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/ecc23a/32.png) [@JanPV2](https://3dprintingspace.com/u/JanPV2)\
**Post date:** [August 23, 2024, 12:45am UTC](https://3dprintingspace.com/t/replace-hot-end/9193/1 "2024-08-23T00:45:43Z")

</div>

I am trying to replace my hotend. Have removed all 8 bolts from the shroud as per the creality instructions. However, the shroud does not want to get off. Any suggestions anyone?

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [August 23, 2024, 2:20pm UTC](https://3dprintingspace.com/t/replace-hot-end/9193/2 "2024-08-23T14:20:50Z")

</div>

What printer?

---

<div class="post-metadata">

**Author:** ![JanPV2](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/ecc23a/32.png) [@JanPV2](https://3dprintingspace.com/u/JanPV2)\
**Post date:** [August 23, 2024, 4:54pm UTC](https://3dprintingspace.com/t/replace-hot-end/9193/3 "2024-08-23T16:54:30Z")

</div>

Ender 7, the discussion subject….
