# SLS material issue

**URL:** <https://3dprintingspace.com/t/sls-material-issue/10454>\
**Category:** 3D Printing Materials\
**Created:** [August 10, 2026, 7:28pm UTC](https://3dprintingspace.com/t/sls-material-issue/10454 "2026-08-10T19:28:55Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Mikesawyer](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/m/858c86/32.png) [@Mikesawyer](https://3dprintingspace.com/u/Mikesawyer)\
**Post date:** [August 10, 2026, 7:28pm UTC](https://3dprintingspace.com/t/sls-material-issue/10454/1 "2026-08-10T19:28:55Z")

</div>

Has anyone experienced problems using Formlabs Nylon12 GF resin. I had a problem getting good prints and wonder if it’s going to be an ongoing issue.

---

<div class="post-metadata">

**Author:** ![BrassKettle](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/brasskettle/32/10664_2.png) [@BrassKettle](https://3dprintingspace.com/u/BrassKettle)\
**Post date:** [August 28, 2026, 4:17pm UTC](https://3dprintingspace.com/t/sls-material-issue/10454/2 "2026-08-28T16:17:00Z")

</div>

I wouldn’t blame the age alone unless the powder has been stored poorly. Formlabs doesn’t give their SLS powders a fixed shelf life when they’re kept sealed and dry.

I’d first check your refresh ratio and storage conditions, then try a small build with a higher percentage of fresh powder. If that improves things, you’ve at least narrowed it down to the material rather than the printer/settings.
