# Tpu filament hardness?

**URL:** <https://3dprintingspace.com/t/tpu-filament-hardness/8138>\
**Category:** Site Feedback\
**Created:** [March 30, 2024, 1:24pm UTC](https://3dprintingspace.com/t/tpu-filament-hardness/8138 "2024-03-30T13:24:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Dr.Marvin](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/dr.marvin/32/195_2.png) [@Dr.Marvin](https://3dprintingspace.com/u/Dr.Marvin)\
**Post date:** [March 30, 2024, 1:24pm UTC](https://3dprintingspace.com/t/tpu-filament-hardness/8138/1 "2024-03-30T13:24:33Z")

</div>

I was looking for some softer tpu than what i currently have (i think 95a) im assuming the store brand is also 95a?

Would it be possible to find out what the store brand tpu hardness is?

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [March 30, 2024, 4:56pm UTC](https://3dprintingspace.com/t/tpu-filament-hardness/8138/2 "2024-03-30T16:56:57Z")

</div>

We did have a chart on here somewhere, but yes the house brand stuff is around 95A. I believe the similar to sainsmart stuff was around 90A.

We just got in some ninjaflex stuff as well, there are some really nice soft ones in there. The 75A one is a pain to print but its crazy flexible!

> **[Shop NinjaTek NinjaFlex, Edge, and Chinchilla Flexible Filaments for Superior...](https://3dprintingcanada.com/collections/ninjatek)**
>
> "Discover unparalleled flexibility and durability with NinjaTek's NinjaFlex, Edge, and Chinchilla filament lines. Engineered for exceptional performance in 3D printing, these advanced materials offer unmatched versatility and strength for creating...

---

<div class="post-metadata">

**Author:** ![gsugar](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/g/e79b87/32.png) [@gsugar](https://3dprintingspace.com/u/gsugar)\
**Post date:** [April 1, 2024, 12:43am UTC](https://3dprintingspace.com/t/tpu-filament-hardness/8138/3 "2024-04-01T00:43:19Z")

</div>

A few years back I was looking for some softer TPU to print RC tires. I cam across a brand that was unusually soft in comparison. Even though it was also 95 its softness was more like a durometer in the 80s. Try Overture brand , specific color was green. Easier to work with then the really soft stuff.