# \[Tutorial\] How To Flash Firmware

**URL:** <https://3dprintingspace.com/t/tutorial-how-to-flash-firmware/3729>\
**Category:** Tips, Tricks and short videos\
**Created:** [February 7, 2022, 4:28pm UTC](https://3dprintingspace.com/t/tutorial-how-to-flash-firmware/3729 "2022-02-07T16:28:33Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Sarah](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/s/9de053/32.png) [@Sarah](https://3dprintingspace.com/u/Sarah)\
**Post date:** [February 7, 2022, 4:28pm UTC](https://3dprintingspace.com/t/tutorial-how-to-flash-firmware/3729/1 "2022-02-07T16:28:33Z")

</div>

Hey everyone,

PJ here showing the steps to flash firmware.

Watch tutorial here: 👇 👇 👇

[![](https://storage.3dprintingspace.com/original/2X/a/a8d6ec9139f59bc396aba6075dd82c36f7e02fc7.jpeg "[Tutorial] How To Flash Firmware") ](https://www.youtube.com/watch?v=viCOGXxZAw8)

Find files/settings for Creality’s 3D printer here 👇 👇 👇  
[Download | Creality 3D](https://www.creality.com/download)

\*\*Please choose the corresponding file/setting for your 3D printer. \*\*

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [February 8, 2022, 4:51am UTC](https://3dprintingspace.com/t/tutorial-how-to-flash-firmware/3729/2 "2022-02-08T04:51:55Z")

</div>

has this been tested with a Mac computer? I found some boards there are no drivers avaliable or easily available so connecting to the board is not easy or possible. It would be good if a mac one was done too.