# Under extruding on start of new layers?

**URL:** <https://3dprintingspace.com/t/under-extruding-on-start-of-new-layers/5581>\
**Category:** Creality Ender 5 Plus\
**Created:** [April 21, 2023, 8:15pm UTC](https://3dprintingspace.com/t/under-extruding-on-start-of-new-layers/5581 "2023-04-21T20:15:03Z")\
**Posts on this page:** 4\
**Page:** 4

<div class="post-metadata">

**Author:** ![JudahCo](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/82dd89/32.png) [@JudahCo](https://3dprintingspace.com/u/JudahCo)\
**Post date:** [May 27, 2023, 4:46am UTC](https://3dprintingspace.com/t/under-extruding-on-start-of-new-layers/5581/61 "2023-05-27T04:46:44Z")

</div>

Hey Mathew,  
no i have not, that sounds interesting,  
any recommendations to any tutorials how to use those Superslicer flow calibration tests?

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [May 29, 2023, 4:44pm UTC](https://3dprintingspace.com/t/under-extruding-on-start-of-new-layers/5581/62 "2023-05-29T16:44:41Z")

</div>

Yes, I will link the video down below but the one I recommend is from teachingtech. His whole video is on a bunch of different calibration things built into super slicer! Definitely worth a look.

Thanks,  
Matthew

[![](https://storage.3dprintingspace.com/original/2X/9/9d773363e1d2aeadfc76b9a4e54d19811508bf15.jpeg "Superslicer in built calibration guide for better 3D prints") ](https://www.youtube.com/watch?v=0ImurmbV5pE)

---

<div class="post-metadata">

**Author:** ![JudahCo](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/82dd89/32.png) [@JudahCo](https://3dprintingspace.com/u/JudahCo)\
**Post date:** [May 29, 2023, 8:10pm UTC](https://3dprintingspace.com/t/under-extruding-on-start-of-new-layers/5581/63 "2023-05-29T20:10:59Z")

</div>

Thanks Mathew!

Tried again with the PrusaSlicer, i fixed the g-code so it goes at an appropriate speed on the Z axis, but not it is going crazy on the over extruding, unless there is a compelling argument, i think we’ll just dig into super slicer, im not sure if it does anything different then prusaslicer? SS has more options 🙂

---

<div class="post-metadata">

**Author:** ![Matthew](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/matthew/32/7552_2.png) [@Matthew](https://3dprintingspace.com/u/Matthew)\
**Post date:** [May 31, 2023, 5:08pm UTC](https://3dprintingspace.com/t/under-extruding-on-start-of-new-layers/5581/64 "2023-05-31T17:08:08Z")

</div>

Yeah, personally I have always preferred superslicer to prusaslicer.

Superslicer seems like it is just prusaslicer+. I am also curious to try out orcaslicer which is a fork of prusaslicer similar to the bambulabs slicer. It also seems like it has some interesting features that prusa/superslicer don’t have.

Thanks,  
Matthew

[Previous page](https://3dprintingspace.com/t/under-extruding-on-start-of-new-layers/5581.md?page=3)