# Upgrading my Cr 10s pro V2

**URL:** <https://3dprintingspace.com/t/upgrading-my-cr-10s-pro-v2/5166>\
**Category:** High-Quality STL Files for 3D Printing\
**Created:** [January 26, 2023, 4:14pm UTC](https://3dprintingspace.com/t/upgrading-my-cr-10s-pro-v2/5166 "2023-01-26T16:14:54Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![Lucas](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@Lucas](https://3dprintingspace.com/u/Lucas)\
**Post date:** [January 26, 2023, 4:14pm UTC](https://3dprintingspace.com/t/upgrading-my-cr-10s-pro-v2/5166/1 "2023-01-26T16:14:54Z")

</div>

I have a Cr 10s Pro V2 and was wondering if it would be worth it to upgrade to linear rails. I already have a micro Swiss on it and a carbon fibre build plate.

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [January 27, 2023, 3:32pm UTC](https://3dprintingspace.com/t/upgrading-my-cr-10s-pro-v2/5166/2 "2023-01-27T15:32:10Z")

</div>

I don’t own a CR10. I did upgrade my Prusa to liner rails. It was not worth the effort. The gain… is easily debatable and I will remove them the next time there is an update to the design.

I would not bother.

[![](https://storage.3dprintingspace.com/original/2X/1/1bdeb47ecf377ad1b5d771c9dfbba1846f4fb568.jpeg "Upgrading the MK3 with genuine HIWIN linear rails: Worth it?") ](https://www.youtube.com/watch?v=J_RcgixLbAI)

---

<div class="post-metadata">

**Author:** ![Lucas](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@Lucas](https://3dprintingspace.com/u/Lucas)\
**Post date:** [January 27, 2023, 8:21pm UTC](https://3dprintingspace.com/t/upgrading-my-cr-10s-pro-v2/5166/3 "2023-01-27T20:21:29Z")

</div>

I haven’t owned a prusa but from what I can tell they are very complete machines.

The Cr 10s is great but there is more room for improvement than the MK3

I’ve got to get it running again but I think I will end up going with a linear rail at least on the x-axis

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [January 29, 2023, 12:40am UTC](https://3dprintingspace.com/t/upgrading-my-cr-10s-pro-v2/5166/4 "2023-01-29T00:40:59Z")

</div>

I can’t speak to Creality. The Prusa the rails didn’t end the faint ghosting it just changed the nature of it. buy good rails. I bought cheapo ones that had rust on them, I ended up buying better quality ones.

---

<div class="post-metadata">

**Author:** ![Lucas](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@Lucas](https://3dprintingspace.com/u/Lucas)\
**Post date:** [January 29, 2023, 8:01pm UTC](https://3dprintingspace.com/t/upgrading-my-cr-10s-pro-v2/5166/5 "2023-01-29T20:01:24Z")

</div>

Good to know thanks for the advice