# Upgrading my old tronxy

**URL:** <https://3dprintingspace.com/t/upgrading-my-old-tronxy/3508>\
**Category:** 3D Printer Parts\
**Created:** [January 15, 2022, 2:03am UTC](https://3dprintingspace.com/t/upgrading-my-old-tronxy/3508 "2022-01-15T02:03:50Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![ddonais](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/d/d6d6ee/32.png) [@ddonais](https://3dprintingspace.com/u/ddonais)\
**Post date:** [January 15, 2022, 2:03am UTC](https://3dprintingspace.com/t/upgrading-my-old-tronxy/3508/1 "2022-01-15T02:03:50Z")

</div>

Good evening all,

I am looking to upgrade my old tronxy bit by bit.

I would like to start with a new hot end assembly and new extruder.

I’ve been looking at the Bowden style with a direct drive. What are your recommendations?

Thanks for all of your input

---

<div class="post-metadata">

**Author:** ![LEGOManiac](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/l/ba8739/32.png) [@LEGOManiac](https://3dprintingspace.com/u/LEGOManiac)\
**Post date:** [January 15, 2022, 5:11am UTC](https://3dprintingspace.com/t/upgrading-my-old-tronxy/3508/2 "2022-01-15T05:11:32Z")

</div>

The first thing I’d recommend, seriously, is that you verify that the Tronxy is working properly so that you’re starting from a known-good state. Then do only one upgrade at a time and test, test, test. That way, if it suddenly doesn’t print well (or at all), you’ll be confident the fault lies with the most recent upgrade rather than a defect it had to begin with.
