# Wall seperation

**URL:** <https://3dprintingspace.com/t/wall-seperation/4905>\
**Category:** Filament 3D Printer Technical Help\
**Created:** [December 13, 2022, 7:48pm UTC](https://3dprintingspace.com/t/wall-seperation/4905 "2022-12-13T19:48:44Z")\
**Posts on this page:** 6\
**Page:** 1

<div class="post-metadata">

**Author:** ![tundra-mountain](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/tundra-mountain/32/6188_2.png) [@tundra-mountain](https://3dprintingspace.com/u/tundra-mountain)\
**Post date:** [December 13, 2022, 7:48pm UTC](https://3dprintingspace.com/t/wall-seperation/4905/1 "2022-12-13T19:48:44Z")

</div>

![IMG_0785](https://storage.3dprintingspace.com/original/2X/8/8289e2985453a120c6d3f9a7932858459caccfdc.jpeg)  
 ![IMG_0764](https://storage.3dprintingspace.com/original/2X/c/c8ca4c7f5ece0fa58064b46ace7c0fff36397026.jpeg)  
I’ve been noticing this problem in a bunch of prints that my layer adhesion is good but the adhesion between walls is nonexistent  
ender 5 pro  
pla  
using cura  
temp bed 50 nozzle 210  
layer height .2  
have varied between 100-115% flow rate  
fan speed 100%  
if any more info is needed I can look

---

<div class="post-metadata">

**Author:** ![HobbyMaker3D](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/h/bb73d2/32.png) [@HobbyMaker3D](https://3dprintingspace.com/u/HobbyMaker3D)\
**Post date:** [December 13, 2022, 9:17pm UTC](https://3dprintingspace.com/t/wall-seperation/4905/2 "2022-12-13T21:17:28Z")

</div>

Check your e-steps, I had same problem when I went to a Micro Swiss hot end.  
Sometimes they get changed, ghost in the machine.

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [December 13, 2022, 10:54pm UTC](https://3dprintingspace.com/t/wall-seperation/4905/3 "2022-12-13T22:54:00Z")

</div>

its usually an overlap setting, Here is a video that goes into much better detail

[![](https://storage.3dprintingspace.com/original/2X/c/cc0119e28f607a8a2d1b7eb4a1d03a0711903e8c.jpeg "Cura 4.8 Slicer Tips for Eliminating Gaps in your 3D Prints") ](https://www.youtube.com/watch?v=WPEWZGhRVe0)

---

<div class="post-metadata">

**Author:** ![tundra-mountain](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/tundra-mountain/32/6188_2.png) [@tundra-mountain](https://3dprintingspace.com/u/tundra-mountain)\
**Post date:** [December 27, 2022, 3:39am UTC](https://3dprintingspace.com/t/wall-seperation/4905/4 "2022-12-27T03:39:17Z")

</div>

think i have it figgured out the e step was at the factury 93/mm turned it up and i now have it turned to 243.3 and it actually is moving 100/mm

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [December 28, 2022, 3:23pm UTC](https://3dprintingspace.com/t/wall-seperation/4905/5 "2022-12-28T15:23:31Z")

</div>

Hi @tundra-mountain

That’s awesome, thanks for letting us know, I will mark your fix as a solution.

How are you making out with your upgrades and repairs, It Looks like you are doing a few.

---

<div class="post-metadata">

**Author:** ![tundra-mountain](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/tundra-mountain/32/6188_2.png) [@tundra-mountain](https://3dprintingspace.com/u/tundra-mountain)\
**Post date:** [December 28, 2022, 9:31pm UTC](https://3dprintingspace.com/t/wall-seperation/4905/6 "2022-12-28T21:31:28Z")

</div>

so far between my school and other things i consider higher importance than the printer i have not been doing much with it recently