# What have you designed **URL:** \ **Category:** 3D Design\ **Created:** [February 4, 2021, 9:11pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100 "2021-02-04T21:11:55Z")\ **Posts on this page:** 20\ **Page:** 1
**Author:** ![Red-Nick](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/r/90db22/32.png) [@Red-Nick](https://3dprintingspace.com/u/Red-Nick)\ **Post date:** [February 4, 2021, 9:11pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/1 "2021-02-04T21:11:55Z")
What are some items that you have thought of and designed to be 3D printed? Was it a prototype that had many iterations or a toy that you just had to have? Let’s share our creativity and discus our methods of putting it from inspiration to design to final print. ---
**Author:** ![eeffoc](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/eeffoc/32/233_2.png) [@eeffoc](https://3dprintingspace.com/u/eeffoc)\ **Post date:** [February 4, 2021, 9:23pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/2 "2021-02-04T21:23:28Z")
I needed something to hold and organize all my home networking equipment so this is what I came up with using TinkerCAD ![PXL_20201214_230133485](https://storage.3dprintingspace.com/original/1X/fc7f11a05ecf70fd0c19f0f760579d89c88c8083.jpeg) ![PXL_20201215_025332725](https://storage.3dprintingspace.com/original/1X/4235c46808502d6dceeabc18afbb6ca824a39dd0.jpeg) ![PXL_20201216_015919451](https://storage.3dprintingspace.com/original/1X/033d700318d06bfe0d1149ee07b1aa7ba1fe3dd2.jpeg) ---
**Author:** ![Red-Nick](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/r/90db22/32.png) [@Red-Nick](https://3dprintingspace.com/u/Red-Nick)\ **Post date:** [February 4, 2021, 9:27pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/3 "2021-02-04T21:27:19Z")
@eeffoc very nice way to clean all that up. I hate chord and box clutter. ---
**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\ **Post date:** [February 5, 2021, 6:37pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/4 "2021-02-05T18:37:58Z")
@eeffoc very nice Jason H ---
**Author:** ![mobiobi](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mobiobi/32/7960_2.png) [@mobiobi](https://3dprintingspace.com/u/mobiobi)\ **Post date:** [February 5, 2021, 7:22pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/5 "2021-02-05T19:22:30Z")
Here’s my Camel-Up dice tower, [Dice Tower (Pyramid) for Camel-Up Board Game by mobiobi - Thingiverse](https://www.thingiverse.com/thing:2826351). Got some other stuff on Thingiverse too, but this was an early design. ![Screenshot_20210205-132322_Chrome](https://storage.3dprintingspace.com/original/1X/95583980ee1eacb7e33cb2ef69f69270eb97ad9f.jpeg) ---
**Author:** ![Amiro62](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/amiro62/32/732_2.png) [@Amiro62](https://3dprintingspace.com/u/Amiro62)\ **Post date:** [February 7, 2021, 1:58pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/6 "2021-02-07T13:58:36Z")
Done some stands to help calibrate the FIMI X8 SE 2020 for 6 axis calibration and a stand for the 3 axis gimbal camera calibration ![image](https://storage.3dprintingspace.com/original/1X/1152dd1d2e32716b9f38ac59daafdb9a44dcceaa.jpeg) ---
**Author:** ![LGSGreybeard](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lgsgreybeard/32/1295_2.png) [@LGSGreybeard](https://3dprintingspace.com/u/LGSGreybeard)\ **Post date:** [February 21, 2021, 6:14am UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/7 "2021-02-21T06:14:33Z")
…for a chemical photography [project I haven’t gotten around to yet: a film developing reel for 16mm still (not movie) film. Working out the math to approximate a spiral with a series of arc segments was a couple of hours of fun. I posted a version of it on Thingiverse: > **[16mm Film Developing Reel by sousvide59](https://www.thingiverse.com/thing:4252926)** > > This is a spool for developing 16mm film from cameras such as the Minolta 16 series. You can load 3 rolls of film per layer, and a standard Paterson tank can accommodate a reel with four layers. ---
**Author:** ![Red-Nick](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/r/90db22/32.png) [@Red-Nick](https://3dprintingspace.com/u/Red-Nick)\ **Post date:** [February 21, 2021, 11:44am UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/8 "2021-02-21T11:44:50Z")
@LGSGreybeard I don’t know anything about film development but from what I can tell that’s a pretty nice design that can be infinitely stacked for as much room you need. What did you model this in? ---
**Author:** ![LGSGreybeard](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lgsgreybeard/32/1295_2.png) [@LGSGreybeard](https://3dprintingspace.com/u/LGSGreybeard)\ **Post date:** [February 21, 2021, 2:19pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/9 "2021-02-21T14:19:36Z")
As with most of my stuff, I used openSCAD. ---
**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Post date:** [February 21, 2021, 2:51pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/10 "2021-02-21T14:51:23Z")
Thats great have you tried to load film on it yet? I’m just setting up my darkroom again. I got almost everything I need used from a retired potograper. All the nice things that were too expensive back in the day that are almost yardsale items today. ---
**Author:** ![LGSGreybeard](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lgsgreybeard/32/1295_2.png) [@LGSGreybeard](https://3dprintingspace.com/u/LGSGreybeard)\ **Post date:** [February 21, 2021, 3:03pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/11 "2021-02-21T15:03:01Z")
You stuff the film into the ends of the spirals, and yes - it can get tricky. I’ve tested it with 16mm-wide strips of cardboard. If you intend to print one of thee to use in anger, please contact me for updated code - I’ve made some tweaks to make them easier to load, like chamfering the edges of the spokes and widening the spiral grooves (the channels are longer than they need to be in the posted version - shortening them allowed me to make them wider) ---
**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Post date:** [February 21, 2021, 3:28pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/12 "2021-02-21T15:28:53Z")
Thanks, I shoot 35mm and I have a few of these for my tanks already. I just wondered how easy they would be to feed with 16mm on a printed part ---
**Author:** ![LGSGreybeard](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lgsgreybeard/32/1295_2.png) [@LGSGreybeard](https://3dprintingspace.com/u/LGSGreybeard)\ **Post date:** [February 21, 2021, 4:53pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/13 "2021-02-21T16:53:24Z")
Cool. I shoot everything from 16mm to 4x5. In 35mm, I have a particular soft spot for 60s and 70s fixed-lens rangefinders. I once did a comparison between negatives from my Konica Auto S2 and a colleague’s Leica M6. The extra $5996.67 he had spent was nearly impossible to see. ---
**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\ **Post date:** [February 21, 2021, 5:06pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/14 "2021-02-21T17:06:09Z")
I’ve always had Minolta. I had a Hi-Matic but went into SLR’s pretty soon after. Still have all of them except one that was stolen and the HiiMatic that I don’t even know where it went. ---
**Author:** ![LGSGreybeard](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/lgsgreybeard/32/1295_2.png) [@LGSGreybeard](https://3dprintingspace.com/u/LGSGreybeard)\ **Post date:** [February 26, 2021, 3:21pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/15 "2021-02-26T15:21:14Z")
This was my first design. I designed it in Tinkercad, and had it printed at the local library, since I didn’t yet have a printer of my own. I had the kitchen rebuilt, and I wanted to mount a tool rail on the glass backsplash without drilling any holes. Here’s the solution: ![20191115_115832](https://storage.3dprintingspace.com/original/2X/6/6c338074da712e537cdb906b12ef2faec589b402.jpeg) ![20191117_193613](https://storage.3dprintingspace.com/original/2X/d/df28d4459b38470c6ebbe1fceed006efa056233e.jpeg) ![20200125_103739](https://storage.3dprintingspace.com/original/2X/f/f8fe2f46a37559c4535a27ed8a846c00db955fe0.jpeg) The “hammered brass” looking section picks up a design cue from the antique coffee dispenser. I modeled every hammer blow as a sphere in Tinkercad. ---
**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\ **Post date:** [February 26, 2021, 5:10pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/16 "2021-02-26T17:10:52Z")
that’s super practical, nice job Jason H ---
**Author:** ![eeffoc](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/eeffoc/32/233_2.png) [@eeffoc](https://3dprintingspace.com/u/eeffoc)\ **Post date:** [February 27, 2021, 12:59pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/17 "2021-02-27T12:59:10Z")
I had a problem with the yarn always getting tangled up under the spindle when I knit, so I designed this yarn guide in tinkerCAD to fit in the slot already in the Yarn Valet. This prints in under an hour and works perfectly. ![PXL_20210227_123346588](https://storage.3dprintingspace.com/original/2X/6/6bd80987aaa7225fc6995e2599652f03a6a82fc6.jpeg) > **[Yarn Valet yarnDispenser guide by Eeffoc](https://www.thingiverse.com/thing:4777333)** > > Help keep your yarn from getting tangled up underneath the spindle... > I had a problem with the yarn always getting tangled up under the spindle so I designed this yarn guide to fit in the slot already in the Yarn Valet. > This prints in under an hour... ---
**Author:** ![Red-Nick](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/r/90db22/32.png) [@Red-Nick](https://3dprintingspace.com/u/Red-Nick)\ **Post date:** [February 27, 2021, 2:49pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/18 "2021-02-27T14:49:16Z")
@LGSGreybeard that is pretty nice. I really like your hammered brass look, very creative. How much weight do you think those prints are holding? Based on how I would assume they where printed I would have been worried about layer separation from the shear force down. ---
**Author:** ![Red-Nick](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/r/90db22/32.png) [@Red-Nick](https://3dprintingspace.com/u/Red-Nick)\ **Post date:** [February 27, 2021, 2:51pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/19 "2021-02-27T14:51:51Z")
@eeffoc that is a great idea. My niece likes to knit. I don’t know if she has a yarn valet yet so I will have to surprise her with one and add this print to it. ---
**Author:** ![mobiobi](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/mobiobi/32/7960_2.png) [@mobiobi](https://3dprintingspace.com/u/mobiobi)\ **Post date:** [February 27, 2021, 4:51pm UTC](https://3dprintingspace.com/t/what-have-you-designed/1100/20 "2021-02-27T16:51:53Z")
@eeffoc nice! My wife is teaching me to knit right now, she uses yarn bowls like this, > **[Yarn Bowl by sbarabe](https://www.thingiverse.com/thing:4596245)** > > Yarn bowl with a base that can be weighted so bowl would be more stable and would not come when the yarn's pulled. > Printed at 0.15mm layers, 3 perimeters and 20% infill, with supports (for the bowl only) so that the bowl curves and opening are more... [Next page](https://3dprintingspace.com/t/what-have-you-designed/1100.md?page=2)