# Wondering if this is fixable?

**URL:** <https://3dprintingspace.com/t/wondering-if-this-is-fixable/10183>\
**Category:** General Discussion\
**Created:** [July 10, 2025, 10:37pm UTC](https://3dprintingspace.com/t/wondering-if-this-is-fixable/10183 "2025-07-10T22:37:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![Jthatcher25](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/j/e47774/32.png) [@Jthatcher25](https://3dprintingspace.com/u/Jthatcher25)\
**Post date:** [July 10, 2025, 10:37pm UTC](https://3dprintingspace.com/t/wondering-if-this-is-fixable/10183/1 "2025-07-10T22:37:23Z")

</div>

Hi all. Brand new to 3d printing, I was given an anycubic 4max pro 2.0 by a friend but it’s almost like it was taken apart? Is it fixable?

 ![IMG_3532](https://storage.3dprintingspace.com/original/2X/b/b6792f92b5c21732152ca5a79ae887737d95e318.jpeg)

---

<div class="post-metadata">

**Author:** ![kitedemon](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/k/ecae2f/32.png) [@kitedemon](https://3dprintingspace.com/u/kitedemon)\
**Post date:** [July 11, 2025, 9:45am UTC](https://3dprintingspace.com/t/wondering-if-this-is-fixable/10183/2 "2025-07-11T09:45:09Z")

</div>

yes. It is hard to see what has been done. I has been modded but what mods I don’t know.

You might have an easier time ot just replace the assembly, rather then work out what was done.

---

<div class="post-metadata">

**Author:** ![Loosenut](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/loosenut/32/3612_2.png) [@Loosenut](https://3dprintingspace.com/u/Loosenut)\
**Post date:** [July 11, 2025, 5:58pm UTC](https://3dprintingspace.com/t/wondering-if-this-is-fixable/10183/3 "2025-07-11T17:58:55Z")

</div>

Welcome to the forum.