# Wont show results

**URL:** <https://3dprintingspace.com/t/wont-show-results/3725>\
**Category:** Simplify3D\
**Created:** [February 6, 2022, 7:08pm UTC](https://3dprintingspace.com/t/wont-show-results/3725 "2022-02-06T19:08:23Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![nierullo](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/n/ce7236/32.png) [@nierullo](https://3dprintingspace.com/u/nierullo)\
**Post date:** [February 6, 2022, 7:08pm UTC](https://3dprintingspace.com/t/wont-show-results/3725/1 "2022-02-06T19:08:23Z")

</div>

When I put the piece on the build plate, it is there. But when I click it to slice, the next screen shows no results, everything says zero. It used to work and now it does this. Been trying to figure it out for months

---

<div class="post-metadata">

**Author:** ![Glenn](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/glenn/32/728_2.png) [@Glenn](https://3dprintingspace.com/u/Glenn)\
**Post date:** [February 7, 2022, 12:05am UTC](https://3dprintingspace.com/t/wont-show-results/3725/2 "2022-02-07T00:05:19Z")

</div>

Hi And welcome. I hope you find answers to this. seems like not many here use this slicer. I searched around a bit and I wonder if you could install another instance of it and see if it works, a couple of posts point to the possibility of a corrupt configuration file but I’d hate to offer that as a diagnostic tool if it caused you to lose some hard-fought configurations.

---

<div class="post-metadata">

**Author:** ![Jason](https://3dps-assets.b-cdn.net/user_avatar/3dprintingspace.com/jason/32/6148_2.png) [@Jason](https://3dprintingspace.com/u/Jason)\
**Post date:** [February 7, 2022, 3:20pm UTC](https://3dprintingspace.com/t/wont-show-results/3725/3 "2022-02-07T15:20:32Z")

</div>

Hi @nierullo

Welcome to the forum, Glad you found us.

I’m going to add @Logan5 or @PJprincefpv into this they may be able to help out.