# X axis homing issue

**URL:** <https://3dprintingspace.com/t/x-axis-homing-issue/5384>\
**Category:** General Discussion\
**Created:** [March 10, 2023, 5:39pm UTC](https://3dprintingspace.com/t/x-axis-homing-issue/5384 "2023-03-10T17:39:11Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Vin](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/v/a87d85/32.png) [@Vin](https://3dprintingspace.com/u/Vin)\
**Post date:** [March 10, 2023, 5:39pm UTC](https://3dprintingspace.com/t/x-axis-homing-issue/5384/1 "2023-03-10T17:39:11Z")

</div>

CR-10 Smart Pro with Sonic pad printed fine one night, the next morning I went to print another file and the printer just drove the nozzle into the bed a kept trying. The CR TOUCH didn’t trigger, the printer will stop if I trigger the touch? There’s no height adjustment on the touch, can anyone point me in the right direction to fix this?  
Thanks.

---

<div class="post-metadata">

**Author:** ![Vin](https://3dps-assets.b-cdn.net/letter_avatar_proxy/v4/letter/v/a87d85/32.png) [@Vin](https://3dprintingspace.com/u/Vin)\
**Post date:** [March 18, 2023, 12:40am UTC](https://3dprintingspace.com/t/x-axis-homing-issue/5384/2 "2023-03-18T00:40:36Z")

</div>

I figured it out. After over a year of usage, somehow the filament was unscrewing the nozzle? Once I took the sock off I knew I had a leak. Put in a new nozzle, recalibrated and it’s up and running again.  
Thought I’d put this here in case this happens to someone else.
