in my experience with the HouseBrand Carbon Petg from 3DprintingCanada, it seems like it no longer actually has carbon dust inside. Im finding it now warps where it would never warp before, it doesnt stick to PEI like it use too either. I have purchased several rolls of this stuff and the recent st…

I’m very sorry to see that you are having problems with our petg Carbon fiber. I can assure you The formula has not changed I just printed some of a fresh roll today for a customer. Potentially maybe do you have a mechanical issue with your printer. If not feel free to call and ask for P.J at the st…

perhaps it was a bad batch, But I have never had Carbon petg warp and it warping easily now. nothing wrong with the machine. print surface seems great. This isnt my first rodeo lol :slight_smile:

HI @adamfilip A bad batch is always possible, even a bad roll has happened a time or 2 with a lot of filaments. To be honest our house brand is usually very dependable. The first thing I would try is to pull off a meter or 2 of it and just try the print again. If its issues with the roll we will fi…

I spent all day trying to get it to stick, reprinted same job 3 times, so im sure Ive gone through 10m+ in the process. its very odd to be honest, Im using a textured PEI sheet and normally this stuff sticks too well. in the end I just swapped in some PLA+ and its working fine, no warping or adhesi…

I actually do not know off hand, Let me send an email and see what answer I get.

Our house brand is 10% CF, our 3DXtech is up to 30%

Neat, i havent tried carbon fiber material yet, but i appreciate the info on whats inside it. Also +2 for customer service here :slight_smile:

thanks, guys appreciate the good feedback. I never used to print a lot of CF but since starting it I am always impressed with its finish. It’s very MATTE looking, no shine at all, Layer lines all but disappear and the strength is a huge bonus.

3D printing with carbon fiber PETG can be challenging due to its abrasive nature. Common issues include nozzle wear, clogs, and layer adhesion problems. To address these, use a hardened steel nozzle, increase print temperatures, and ensure proper part cooling. Additionally, consider reducing print s…

3D Printing Space

3D Printing Canada - Carbon Fiber PETG Printing Issues

3D Printing Materials

show post in topic

Home
Categories
Guidelines
Terms of Service
Privacy Policy

Powered by Discourse, best viewed with JavaScript enabled

Explore the world's best 3D printing forum! Get free technical support, share insights, and collaborate on 3D printing projects. Ideal for beginners and experts alike, this community is your go-to source for 3d printer tips, discussions, and innovation in 3D printing.