CR-10 Max - Start/End Gcodes

3D Printers
1

i’ve been messing around with Start/End Gcodes for the Creality CR-10 Max in PrusaSlicer… i also have a Prusa printer… and i was trying to reproduce the wipe/purge line like my Prusa… i’m close but it still is stringy from the purge line to the start of my 1st layer… any help?

2

do you have lift z enabled? you could also add a small retract after the strip.

ie, my mk3 is
G1 Y-3.0 F1000.0 ; go outside print area
G92 E0.0
G1 X60.0 E9.0 F1000.0 ; intro line
G1 X100.0 E12.5 F1000.0 ; intro line
G1 E-1 <========================================add retract here
G92 E0.0

2 Likes
3

there ya’ go!! i knew i was missing something!!

thanks so very much!!

-L e o n a r d

1 Like