For the Printer setup, I used a CR-10 Max and updated the retractions from 6.5 to .5mm
The printing profile is located here
For the Printer setup, I used a CR-10 Max and updated the retractions from 6.5 to .5mm
The printing profile is located here
hi Jason
I can’t open the file for the Cura files for cr-m4
can you send them to me please
Hello everyone,
I thought I would throw in an update to this thread with my prusaslicer profile for the CR-M4!
I have been using the profile for a little while now and it works like a charm.
The file can be downloaded from here, If you have any questions or problems with it just let me know!
Matt
Hello matthew,
is this for the cura settings for the crm4? im apologize if its redundant
i just dont want to mess it up
@Jason looks like your file is password protected for the Cura Profile!
Hi @REAPER - @Matthew’s not in the office today, so I thought I would chime in here. Jason originally posted a file for Cura, while Matthew’s is a Prusa Slicer profile.
Hope this helps!
I have moved the file over to Google drive and updated the link.
@lauran Test and make sure it’s accessible now if you don’t mind.
looks like we’re able to download it now!
The CR M4 is my second 3D type printer, and it’s been problematic from the gitgo. Even CR M4 isn’t searchable here, but CRM4 is. Cura had the profile for it ( maybe I had to visit there site, I really don’t remember with all the problems). Anyway my print head clogged for the third time so currently only my Longer K5Pro is currently running.