i’ve followed instructions to install the MicroSwiss hotend, from CJ, at 3d printing canada. Excellent instructions.
it is working well
BUT, question
there is a button to set the temperature of hotend and nozzle, (prior to starting printing), has AUTO and MANUAL.
Is there a way to set the temperature value, for the AUTO setting, for the PLA, and ABS, buttons? in the default firmware there was a way to set the temperature, for example, to 60 hotbet, 220 nozzle, and that way i would just go to
temperature - AUTO - PLA button - and it would set the above.
now i have to enter it manually, can’t find an option to enter it to establish a default value.
any help appreciated, thanks