Decided to go with the Micro Swiss direct drive on my Ender 3 v2, and printed the satsana duct with the bltouch mount. Everything works great, but the X home now seems to be just to the left of the build plate, meaning my purge line doesn’t actually get laid down on the print surface.
I’ve tried setting the X offset for my bltouch to different values, but that didn’t seem to fix it. Anyone have any other advice?
On the printer…
Control
Motion
Home offsets
X Offset.
That is with the jehr (spelling?) firmware.
the M851 should show X-39 Y-9
Should bring the probe within 5 mm of the left front corner on a G29
Let us know if it works out OK
Well, the nozzle still homes just off the bed. I’ve tried changing offsets, and that doesn’t seem to do anything. I guess it’s not a big deal, I changed my starting gcode to move my purge line in 5mm, which seems to fix the issue.
I’m not familiar with a real Ender 3 but can you move the left X-Axis stop (to the right) so that when X = 0 the nozzle is right over the edge of the heatbed?
