Mini Furniture and vests for Lego Mini-figures

3D Printing Gallery
1

Recently I’ve been making mini furniture items to add to Lego scenes, here are a couple!

The fridge and oven range were printed with a 0.4mm nozzle.
The vests are also done with a 0.4mm nozzle after struggling with a 0.2mm nozzle for a while :sweat_smile:

I was originally going to print them quickly to test on a FDM machine then do the final prints in resin, but I’m quite happy with the quality of them as they are!
Certain items I’ve tried
(like a TV set with bunny ears) just didn’t work out in FDM, those I’ll have to do in resin.

Screenshot_20210407-124054
Screenshot_20210407-1240542460×1080 408 KB
Screenshot_20210407-124338
Screenshot_20210407-1243381080×2460 391 KB
Screenshot_20210407-124324
Screenshot_20210407-1243241080×2460 309 KB

2

Nicely done! How long did the appliances take to print?

3

Not long at all, they are about 0.5 - 3 hours each.

The table that the cat is on, that is basically hidden on the right side only takes about 35 minutes. The fridge, with 5% infill took 2.5 hours.