There’s been an amazing ‘AHA!’ with my BIQU lately. The Poltergesit that lives inside it must have heard me talking about boxing it up and relegating it to the cold and dark attic. Long story short; along with going back to simpler Cura profiles I’ve started using the Marlin Mode exclusively. A manual level is followed by the BLT and once completed, the file loaded and ‘tuned’ it does another BLT level and then goes to work. I’ve also discovered that the lights really do have a pupose. I thought they were just a nice sales add-on. But they really do tell you where the printer is at in terms of the prep process. It still makes mournful fan noises when starting up, even after loosening the screws to the fan housings, but that fades away after about a minute or so and it runs nice and quiet with very good print results.
1 Like