Like not always available on first post

[LEGOManiac]

I’ve noticed that the Like option doesn’t appear on all first posts.

This first post has one, for example:

BSOD on Ender 5 Pro after shorting thermistor

Hi, folks. So, last week I’d had a bad nozzle clog. As I was removing the nozzle to clean it out, I loosened the heat break (Micro Swiss all-metal hotend). After cleaning up the nozzle and putting things back together, I wanted to make sure the heat break was solidly in the heater block. My understanding is that it should be tightened once more after the block is hot. So I duly heated everything up to 220 (what the instructions recommended for tightening the nozzle) and got in there with th…

But this one doesn’t:

Great satsana duct

Ender 3 with satsana duct works great, if anyone is looking for a good print in place fan duct this one is amazing, and there are remixes for the bltouch or 5010 cooling fan. Great and simple setup works great on my ender 3 with mircoswiss direct drive and bltouch. [image] [image]

I only noticed this because I had wanted to “like” the second one to show my appreciation for the author’s recommendation of a fan shroud.

Is the inconsistency intentional?

[Redracefpv]

I don’t know much about that like issue but thanks for looking at my comment

[Jason]

I have noticed that as well, I never really paid attention until you mention it, I will look into it and see what I can find out.

[Jason]

Liking the first post is not enabled.

You should see it on all posts in any category.

[Jason]

Just an update, the Problem has been resolved, and Liking is now available on all posts including the first post in a thread.